PE7_3 Simulation engineering and modelling

ERC 3rd level Code

PE7_7 Signal processing

PE8_13 Industrial bioengineering

PE8_4 Computational engineering

Research Activities

•   Smart instruments for measurements on components and systems
•   Development of measuring system for health monitoring and wearable sensors
•   Analysis of biomedical signal
•   Medical image processing
•   Environmental monitoring and remote sensing

Department

filippo.attivissimo@poliba.it

Contact Person

Filippo Attivissimo

Companies and Institutions

1. ApuliaBiotech - Bari

2. Item Oxigen srl-Altamura

3. IVIS-Taranto

4. MASMEC Biomed – Modugno (BA)

5. Universitad Politecnica de Valencia

Projects

1. POR Puglia FESR-FSE 2014-2020, bando INNONETWORK - Aiuti a sostegno alle Attività di R&S, “SINACH - Sistemi integrati di navigazione per chirurgia mini invasiva”.

Funding

1. Progetto POR “Tech4biomed - Tecnologie per la Biomedicina” (2017-2019). Amount 300 k€

Facilities

Basic measurement instrumentation (mixed-signal oscilloscopes, arbitrary waveform generators, power supplies, ADC boards)

sensors for biomedical signals

patient simulator

multiparametric monitors

Electrical Safety Analyzer

Softwares

Mathworks Matlab

National Instruments LabVIEW

Services

teaching

Internship

prototyping

StakeHolder

Address / How to reach us

Polytechnic University of Bari Via E. Orabona, 4 “Luigi Salvatore” building, 2th floor

Hours

Mon – Fri, 8.00 AM - 7.00 PM

OML

filippo.attivissimo — Wed, 22 Dec 2021 12:00:40 +0000

OML filippo.attivissimo Wed, 12/22/2021 - 13:00

Lab full name

OpenMultiLab

ERC 2nd Level Code

PE7_2 Electrical engineering: power components and/or systems

ERC 3rd level Code

PE7_7 Signal processing

PE7_4 (Micro and nano) systems engineering

PE8_4 Computational engineering

Research Activities

Design and prototyping of PC-, microcontroller- and DSP-based mixed signals Data Acquisition (DAQ) and Data Processing Systems
Industrial circuits, PLC programming and machines diagnostic for faults prevention
Wireless Sensor Networks (WSN) design and prototyping
Energy harvesting and energy monitoring from renewable energy sources
Time Domain Reflectometry measurement system and waveform analysis
Power quality measurements

Department

filippo.attivissimo@poliba.it

Contact Person

Filippo Attivissimo

Companies and Institutions

SITAEL S.p.A. - Mola di Bari

MASMEC S.p.A. - Bari

SIPAL S.p.A. - Torino

Centro Studi Componenti per Veicoli S.p.A.(CVIT) - Gruppo Bosch – Modugno (BA)

MER MEC – Monopoli

Schneider Electric S.p.A. – Modugno (BA)

Projects

Progetto PON R&I 2014-2020, “RAFAEL - Sistema per la previsione e la gestione del rischio sulle Infrastrutture Critiche nel Sud Italia” Area di specializzazione “Smart Secure & Inclusive Communities”, 2018-2020.

Progetto PON R&I 2014-2020 “FURTHER - FUture Rivoluzionarie Tecnologie per velivoli più Elettrici” Area di specializzazione “Aerospazio, 2018-2020.

Progetto PON R&I 2014-2020 “MITIGO- Sistemi integrati per la mitigazione del rischio idrogeologico e sismico di pendii, strutture e infrastrutture strategiche in contesti geomorfologici tipici dell’Italia Meridionale”, 2018-2020).

Progetto PON R&I 2014-2020 “Maia: Monitoraggio attivo dell’infrastruttura ”, Area di specializzazione “Mobilità sostenibile”, 2018-2020.

Funding

Progetto POR Puglia dal titolo “Openmultilab” per la realizzazione di un nuovo laboratorio multidisciplinare del Politecnico di Bari, amount 250 k€

Facilities

Basic measurement instrumentation (mixed-signal oscilloscopes, arbitrary waveform generators, power supplies, ADC boards)

3D FFF and resin printers

6 DOFs Robotic arm

160 l climatic chamber

PXI-based high frequency modular vector signal generators and digitizers

Softwares

Mathworks Matlab

National Instruments LabVIEW

Services

Teaching

Internship

3Electronic circuits design and prototyping

StakeHolder

Address / How to reach us

Polytechnic University of Bari Via E. Orabona, 4 “Luigi Salvatore” building, underground floor

Hours

Mon – Fri, 8.00 AM - 7.00 PM

AE&M Lab

cristoforo.marzocca — Thu, 16 Dec 2021 10:00:55 +0000

AE&M Lab cristoforo.marzocca Thu, 12/16/2021 - 11:00

Lab full name

Applied Electronics and Microelectronics

ERC 2nd Level Code

ERC 3rd level Code

PE7_4 (Micro and nano) systems engineering

PE7_11 Components and systems for applications

Research Activities

The lab has long been involved in the development and characterization of multichannel integrated circuits for read-out of solid-state detectors and sensors for high energy physics and medical imaging. Another related activity is the characterization of detectors, sensors and electronic devices. In more detail, the main current research lines are the following:

Design of multichannel mixed-signal integrated circuits (ASIC) for the read-out of solid-state detectors used in high energy physics experiments and medical imaging applications

Development of sensor interface electronics for environmental monitoring
Prototyping (via access to the European consortium EUROPRACTICE) and characterization of integrated circuits
Design and realization of hardware/firmware systems based on programmable devices (FPGA)
Characterization of solid-state detectors for physics experiments and medical imaging applications (Silicon Photomultipliers)

Department

cristoforo.marzocca@poliba.it

Contact Person

Cristoforo Marzocca

Technical Staff

Vincenzo Scarola, Gennaro Gelao

vincenzo.scarola@poliba.it

Companies and Institutions

SLAC Stanford, Menlo Park (CA, USA)

CERN, Geneva (Switzerland)

Munster Technological University, Cork (Ireland)

Istituto Nazionale di Fisica Nucleare

Fbk-IRST, Trento

AVIO AERO, Bari

ETG Risorse, Chivasso (To)

ITEL, Ruvo di Puglia

Matrix s.r.l., Conversano (Ba)

Cupersafety s.r.l., Conversano (Ba)

Microlaben s.r.l.(spin-off company of Politecnico di Bari)

Projects

CMS experiment (CERN – Geneva)

H2020 “PASSEPARTOUT” (European Community)

H2020 "EVOQUE" (European Community)

POC "SPHERE" PNRR

Research contract “Collaboration on the development of a Time-of-Flight (ToF) readout system for Silicon Photon Multipliers” (SLAC Stanford)

Innolabs “Sistema partecipativo attivo per la sensibilizzazione delle comunità al rischio di esposizione al GAS RADON” (Apulia Regional government)

PON “FURTHER - FUture Rivoluzionarie Tecnologie per velivoli più Elettrici” (MIUR)

Funding

MIUR – 445 k€

SLAC Stanford – 34 k€

Apulia Regional government – 20 k€

European Community – 120 k€

Politecnico di Bari – 6 k€

Facilities

-Linux workstations for IC design, equipped with the suite Cadence IC

-Semi-automatic probestation Karl Suss PM8, optical microscope 50X Karl Suss

-Logic state analyzer Tektronix, 32 channels

-Semiconductor parameter analyzers HP4145B and 4155B

-Spectrum analyzer Agilent N1996A, 100kHz-6GHz

-Oscilloscope DPO Tektronix 4GHz, 4 channels

-Oscilloscope Rohde-Schwarz 4GHz, 4 channels

-Arbitrary signal generator Tektronix, 200MHz

-Standard lab instrumentation (stabilized power supplies, digital multimeters, low-end oscilloscopes and function generators)

Softwares

Suite Cadence IC for electronic design

Services

IC design and prototyping, via EUROPRACTICE service (only for research and educational purposes, no commercial activities)

StakeHolder

PE3 Condensed Matter Physics

Address / How to reach us

Via Orabona 4, 70125 – Bari (Italy)

Dipartimento di Ingegneria Elettrica e dell’Informazione

Plesso Salvatore, IV floor

DEI main building, II floor

Hours

Mon - Fri 9:00 - 17:30

Area (mq)

LabZERO

massimo.lascala — Mon, 06 May 2019 07:43:31 +0000

LabZERO massimo.lascala Mon, 05/06/2019 - 09:43

Network Lab full name

ZERO: Energy Efficiency & Renewables Laboratory

ERC 2nd Level Code

PE4 Physical and Analytical Chemical Sciences

PE5 Synthetic Chemistry and Materials

PE7_1 Control engineering

ERC 3rd level Code

PE7_2 Electrical engineering: power components and/or systems

PE7_12 Electrical energy production, distribution, application

PE8_6 Energy processes engineering

PE8_10 Industrial design

PE8_11 Sustainable design

PE3_2 Mechanical and acoustical properties of condensed matter, Lattice dynamics

PE4_17 Characterisation methods of materials

PE8_3 Civil engineering, architecture, maritime/hydraulic engineering, geotechnics, waste treatment

PE8_9 Production technology, process engineering

PE8_12 Lightweight construction, textile technology

PE3_3 Transport properties of condensed matter

PE3_4 Electronic properties of materials, surfaces, interfaces, nanostructures, etc.

PE3_5 Physical properties of semiconductors and insulators

PE5_4 Thin films

PE5_6 New materials: oxides, alloys, composite, organic-inorganic hybrid, nanoparticles

PE7_5 (Micro and nano) electronic, optoelectronic and photonic components

Research Activities

LabZERO is a multidisciplinary laboratory to enable strategic cooperation with enterprises and promote multidisciplinary research for the development of innovative technologies in the areas of energy efficiency and renewable energy sources in both urban and industrial sectors. Research and experimentation activities in LabZERO make use of simulation tools and technologically advanced equipment, in order to reduce the risks of applied research and support product innovation in the path “from concept to market”. The laboratory provides innovative solutions for fast prototyping, for the certification of materials and the development of complex systems, in the fields of energy efficiency, energy conservation, sustainable manufacturing, smart grids and smart cities.

LabZERO activities are based on the coordinated work of four research units: three units at the Politecnico di Bari (DEI, DMMM, DICAR), and one at the ENEA Research Center in Brindisi. The Lab is part of the Apulian network for the applied research fostered by “Regione Puglia” and aims to the integration with other R&D networks and industrial clusters. A main strength of the LabZERO is the collaboration with entities of different nature. In fact, LabZERO works in close cooperation with about forty stakeholders such as industrial developers, public territorial bodies, public administrations and Municipalities, and relevant research actors.
The main research activities of LabZERO concern:

Fast prototyping of electro-mechanical equipment and devices for smart city and home automation
Hardware-in-the-loop (HIL) and power-hardware-in-the-loop (PHIL) applications
Prototyping and testing of components for smart grids and microgrids
Medium and low voltage distribution automation
Advanced protection systems
Electrical Vehicles infrastructures, smart charging and Vehicle to Grid (V2G)
Design and test of micro wind turbines
Sustainable manufacturing, de-manufacturing by cryogenics and recycling of waste of electric and electronic equipment (WEEE)
High performance building material characterization
Non-destructive tests for the mechanical characterization of materials and structures
Smart materials and devices for the thermoelectric generation from waste heat or solar energy
Solar heating & cooling
Industry 4.0
Smart Manufacturing & Smart Farming

Department

Contact Person

massimo.lascala@poliba.it

Companies and Institutions

Washington State University

University of Illinois Urbana-Champaign

École Polytechnique Fédérale de Lausanne EPFL

Retegas Bari S.p.A.

AMET S.p.A

Blue H R&D SRL

CIAB

CNA Bari

Comune di Bari

Comune di Bitetto

Comune di Capurso

Comune di Cellamare

Comune di Margherita di Savoia

Comune di Polignano a Mare

CONFAPI Bari e BAT

Costellazione Apulia

Confindustria Puglia

Dyrecta Lab S.r.l.

EV Charging

I-Com

Mediterranean Design Network S.r.l.

Nomisma Energia

Città Metropolitana di Bari

Provincia di Taranto

ReEnergy Projects 1 S.r.l

RSE

STC S.r.l

Tera S.r.l.

UPI Puglia

Fincons S.p.A.

ALI6 S.r.l.

EMI S.r.l.

Garofoli S.p.A.

GEM ICT – Research & development S.r.l.

Ginex Gaetano

SIC Divisione Elettronica S.r.l.

Comune di Palo del Colle (BA)

Confindustria Brindisi

Niteko S.r.l.

Applica Iot S.r.l.

Dgs S.p.A.

Elfim S.r.l.

Italian Cutting System S.r.l. (ICS)

So.Co.In. / System S.r.l.

Centro di Ricerche Europeo di Tecnologie Design e Materiali (CETMA)

Kad3 S.r.l.

InResLab S.c.a.r.l.

CNR

Università di Genova

Università di Bari

ARPA Puglia

PUDA Società Cooperativa A.R.L.

G.M.T. S.P.A.

Snam S.P.A.

Università degli Studi di Palermo

NIR S.r.l.

TERNA

e-distribuzione S.p.A.

Gridspertise S.R.L.

T & M LOGISTICA INTEGRATA S.R.L.

INGEL - S.R.L.

ILMEA S.R.L.

CHARISMA - SOCIETA' COOPERATIVA SOCIALE - O.N.L.U.S.

NEW EUROART S.R.L.

THESIS LAB S.R.L.

Projects

"sistemi e TECnologie per l'idrogeno (TECH2)" - Project MISE F/350388/01-05/X60 - Accordi per l'innovazione DM 31/12/2021

"DownTown-Mobi Downtown by electric Mobility (Downtown-Mobi)" - Project MISE F/340062/01-05/X59 - Accordi per l'innovazione DM 31/12/2021

PRIN 2022 - "Smart COmmunities for Resilient Energy Transition (SCORET)" - Prot. 2022YYMWTJ

Technical scientific agreement with ENEA on design, implementation and testing of models for the reconfiguration of distribution networks

PNRR POR H2 Collaboration Agreement for study and definition of control strategies for interface converters used in electrolyzers and fuel cells

PNRR POR H2 Collaboration Agreement for study and development of use cases and control strategies for networks with high hydrogen vector penetration

FESR-FSE 2014-2020 Azione 1.4 “E-Park - Microgrid Parking: Parcheggio intelligente per la Smart City” – Avviso pubblico “Innolabs”, cod. NGFKLZ2.

Technical scientific agreement with SNAM S.p.A. for the development of a model aimed to remove intra-zonal congestions of the transmission network

Technical scientific agreement with Università degli Studi di Palermo about feasibility studies aimed at designing of microgrids concerning BLORIN project.

Technical scientific agreement with e-distribuzione S.p.A. for the development of integrated storage and microgrid controllers in minor Italian islands for ISMI project.

Technical scientific agreement with Next Intelligence Research (N.I.R) S.r.l. for designing and testing of components for distribution systems and of intelligent management devices.

H2020 -LCE-04-2017 – Project CTN02_00018_9856993 “Living grid”.

H2020-LCE-2017-SGS – Project 773406 “Optimal System-Mix Of flexibility Solutions for European electricity – OSMOSE”.

FESR-FSE 2014-2020 Action 1.6 – “Integrated system for lighting and urban mobility services - EMERA", INNONETWORK 2017 – Puglia Region, cod. QCXK671.

Technical scientific agreement with Università degli Studi di Bari and ARPA Puglia for research and consulting activities in efficiency and energy saving for a technological park (“Technopolis”).

ENERGY ROUTER – “Energy Router e Strumenti di Controllo Cloud per Smart Grid”, financed by Puglia Region within the call “Aiuti a Sostegno dei Cluster Tecnologici Regionali”, cod. HX8HXI1.

“Smart industrial energy district nel polo industriale di Brindisi”.

Funding

MISE - Accordi per l'innovazione DM 31/12/2021 - 752k€ (1325k€)

MISE - Accordi per l'innovazione DM 31/12/2021 - 811k€ (1413k€)

European Union - Next Generation EU, Mission 4 'Education and Research' - Component C2 Investment 1.1, 'Fund for the National Research Programme and Projects of Significant National Interest (PRIN)' - (399k€)

MASE-ENEA Program Agreement on the National Electric System Research, Three-Year Implementation Plan 2022–2024 (135k€)

072-TERIN-STSN, Activity Line 4.1.1 of the PNRR, Mission 2, Component 2, Investment 3.5, NEXT GENERATION EU (Implementing Entity: ENEA – TERIN Department) (33k€)

073-TERIN-STSN, Activity Line 4.2.1 of the PNRR, Mission 2, Component 2, Investment 3.5, NEXT GENERATION EU (Implementing Entity: ENEA – TERIN Department) (45k€)

FESR-FSE 2014-2020 Azione 1.4, “E-Park” project - 211 k€.

SNAM S.p.A., technical agreement - 90.8 k€.

Università degli Studi di Palermo”, technical agreement for “BLORIN” project - 50 k€.

e-distribuzione S.p.A., technical agreement for “ISMI” project - 150 k€

N.I.R. S.r.l., technical agreement - 845 k€.

H2020 -LCE-04-2017, “Living grid” project - 19.5 k€.

H2020 -LCE-2017-SGS, “OSMOSE” project – 35 k€.

FESR-FSE 2014-2020 Action 1.6, “EMERA" project - 190 k€.

Università degli Studi di Bari and ARPA Puglia, technical agreement for “Technopolis" - 15 k€.

Puglia Region, “ENERGY ROUTER” project – 650 k€.

Confindustria Brindisi, “Smart industrial energy district nel polo industriale di Brindisi” – 45 k€.

Facilities

A microgrid test facility:

• Real time digital simulator (RTDS RT-5600)

• RTDS Interface to IEC 61850 equipment

• 4-quadrants programmable power source with multiple AC and DC power output configurations (15 kW)

• Photovoltaic power plant (5 kW)

• 4-quadrants controllable Battery Energy Storage Systems (5/5 kW/kWh)

• An experimental biomass externally fired combined cycle plant

• An innovative open-air wind tunnel

• EV charging station (11 kW)

Microgrid Parking:

• Photovoltaic power plant (11 kW)

• 2 Battery Energy Storage Systems (15/15 kW/kWh)

• 2 EV charging stations (22 kW)

Cryogenic testing device

Gas pycnometer and gas sorption analyzer

Laser-ultrasonic test bench

Arduino development kit

AC and DC bench power supply

PLC modules

Microcontroller development boards

Current clamps

Controllable load (resistive, inductive, capacitive)

Digital scopes and spectrum analyzer

Smart camera

Earth fault detector

Luminance and illuminance meters

HV insulation test

Softwares

PowerFactory – DIgSILENT

COMSOL

LabVIEW

Matlab/Simulink

Services

• Fast prototyping of electrical equipment & systems

• Design and testing of control boards through hardware-in-the-loop (HIL)

• Design and testing of power components through power-hardware-in-the-loop (PHIL)

• Testing and setting of electrical protection systems

• Power quality measurement and immunity tests

• Measurements of low-frequency electromagnetic fields

• Dielectric strength tests on cables

• Main measurements from electrotechnical laboratory

• Main lighting measures

• Measurements for grounding system

• Short circuit analysis

• Power system simulation of complex transmission and industrial grids

• Operator Training Simulator for the training of operators in industrial as well as transmission power systems

• Design and verification in substation automation

• Communication and network integration tests with IEC 61850 devices

• Communication tests of the I/O list in SCADA applications under IEC 61850 protocol

• Testing of micro wind power turbines

• Mechanical characterization of materials through laser and nanosonic interferometry

• Thermal cycles testing of materials using a climatic chamber

• Cryogenic and demanufacturing techniques for recycling exhausted PV panels

• Thermal diffusivity, specific heat, thermal conductivity measurements

• Measurement and characterization of thermo-electrical parameters of thin film materials

• Modeling and simulation of materials, components and devices

StakeHolder

Address / How to reach us

Via Amendola 132, Bari, Officine Politecniche, Plesso “ex Scianatico” – LabZero

Hours

Mon - Fri 8:00 - 18:00

Area (mq)

800

Link to laboratory

Clean Room

vincenzo.petruzzelli — Mon, 11 Feb 2019 11:40:21 +0000

Clean Room vincenzo.petruzzelli Mon, 02/11/2019 - 12:40

Lab full name

Clean Room

ERC 2nd Level Code

PE7_5 (Micro and nano) electronic, optoelectronic and photonic components

ERC 3rd level Code

PE7_6 Communication technology, high-frequency technology

Research Activities

Design and characterization of plasmonic nanostructures for applications in sensors, photovoltaics, near field enhancement.
Design and characterization of nanoantennas for optical wireless network on.chip.
Design and characterization of beam steering from subwavelength apertures in metal substrates.
Polymeric sensors for biomedical and industrial applications.
Design and characterization of optical interconnecting devices for chip multiprocessor architectures.
Design and characterization of III-V-N of semiconductor active photonic devices and photonic crystals for laser applications.
Design, fabrication and characterization of integrated optical devices by sputtering, ion-exchange, spin-coating techniques.

Department

vincenzo.petruzzelli@poliba.it

Contact Person

Vincenzo Petruzzelli

Companies and Institutions

National Nanotechnology Laboratory (NNL), CNR Istituto di Nanoscienze – Lecce (Italy)

Centro di nanotecnologie bio-molecolari, Istituto Italiano di Tecnologia (IIT) – Arnesano – Lecce (Italy)

Institute of Inorganic and Plasmas Methods, IMIP-CNR (Italy)

Microphotonics Group – St. Andrews University (UK)

Department of Materials Science, University of Patras (Greece)

LAAS-CNRSM, Toulose (France)

Projects

Progetto di ricerca " Ottimizzazione delle proprietà ottiche e di trasporto di strati di graphene da impiegare in celle ad eterogiunzione a-Si:H/c-S"

Progetto Galileo 2018 Italia-Francia "Selective nanotweezers based on integrated plasmonic resonators for environmental monitoring"

PRIN 2015 dal titolo "Wireless Networks through on-chip Optical Technology - WiNOT"

Progetto Galileo Italia-Francia 2014 "Experimental demonstration of mesoscopic self-collimation guiding"

Progetto Regionale "Laboratorio Regionale di Sintesi e caratterizzazione di nuovi materiali organici e nanostrutturati per Elettronica, Fotonica e Tecnologie Avanzate"

FIRB 2008 dal titolo "PHOTONICA - Photonic Interconnect Technology for Chip Multiprocessing Architectures"

Facilities

Clean room in class 100-1000 equipped with chemical hood,

thermostat oven for ion exchange,

spin coater and DC - AC sputtering equipment.

Services

Fabrication and characterization of integrated optical devices by sputtering, ion-exchange, spin-coating techniques.

Deposition of dielectric or metal thin films on optical substrates with high degree of purity.

Treatments for the cleaning of optical subsatrates.

StakeHolder

Address / How to reach us

Via Re David 200, Bari, c/o Department of Electrical and Information Engineer

Hours

Hours (*) From Monday to Friday: hours 9:00-17:00

Area (mq)

Link to external content

http://npeg.poliba.it/

AP Lab

vincenzo.petruzzelli — Mon, 11 Feb 2019 11:30:43 +0000

AP Lab vincenzo.petruzzelli Mon, 02/11/2019 - 12:30

Lab full name

Apulia regional laboratory of characterization of new organicand nanostructured materials

ERC 2nd Level Code

PE7_5 (Micro and nano) electronic, optoelectronic and photonic components

ERC 3rd level Code

PE7_6 Communication technology, high-frequency technology

Research Activities

Design and characterization of plasmonic nanostructures for applications in sensors, photovoltaics, near field enhancement.
Design and characterization of nanoantennas for optical wireless network on.chip.
Design and characterization of beam steering from subwavelength apertures in metal substrates.
Polymeric sensors for biomedical and industrial applications.
Design and characterization of optical interconnecting devices for chip multiprocessor architectures.
Design and characterization of III-V-N of semiconductor active photonic devices and photonic crystals for laser applications.
Design, fabrication and characterization of integrated optical devices by sputtering, ion-exchange, spin-coating techniques.

Department

vincenzo.petruzzelli@poliba.it

Contact Person

Vincenzo Petruzzelli

Companies and Institutions

National Nanotechnology Laboratory (NNL), CNR Istituto di Nanoscienze – Lecce (Italy)

Centro di nanotecnologie bio-molecolari, Istituto Italiano di Tecnologia (IIT) – Arnesano – Lecce (Italy)

Institute of Inorganic and Plasmas Methods, IMIP-CNR (Italy),

Microphotonics Group – St. Andrews University (UK)

Department of Materials Science, University of Patras (Greece)

LAAS-CNRSM, Toulose (France)

Projects

Progetto di ricerca " Ottimizzazione delle proprietà ottiche e di trasporto di strati di graphene da impiegare in celle ad eterogiunzione a-Si:H/c-S"

Progetto Galileo 2018 Italia-Francia "Selective nanotweezers based on integrated plasmonic resonators for environmental monitoring"

PRIN 2015 dal titolo "Wireless Networks through on-chip Optical Technology - WiNOT"

Progetto Galileo Italia-Francia 2014 "Experimental demonstration of mesoscopic self-collimation guiding"

Progetto Regionale "Laboratorio Regionale di Sintesi e caratterizzazione di nuovi materiali organici e nanostrutturati per Elettronica, Fotonica e Tecnologie Avanzate"

FIRB 2008 dal titolo "PHOTONICA - Photonic Interconnect Technology for Chip Multiprocessing Architectures"

Facilities

• Spectrometric Ellipsometer,

• micro-controlled surface Profilometer,

• System for the deposition of thin films made of Spin coater,

• UV lamp and heating plate,

• Instrumentation for the characterization of thin films made of polarizing microscope including a BF/DF optical Kit.

Services

Characterization of thin films.

Measure of roughness and depth of optical films.

Deposition of polymeric film on glass substrates by spinning technique.

StakeHolder

Address / How to reach us

Via Re David 200, Bari, c/o Department of Electrical and Information Engineer

Hours

From Monday to Friday: hours 9:00-17:00

Area (mq)

Link to external content

http://npeg.poliba.it/

E&EM Lab

anna.lanzolla — Wed, 06 Feb 2019 08:09:26 +0000

E&EM Lab anna.lanzolla Wed, 02/06/2019 - 09:09

Lab full name

Electrical and Electronic Measurement Lab

ERC 2nd Level Code

ERC 3rd level Code

PE7_7 Signal processing

PE8_1 Aerospace engineering

PE8_4 Computational engineering

Research Activities

Smart instruments for measurements on components and systems
Model identification, parameters estimation and characterization of electrical machines, equipment, apparatus and electrical drives
Development and characterization of components and sensors for the aerospace industry
Environmental monitoring and Remote Sensing

Department

Contact Person

Anna M. L. Lanzolla

anna.lanzolla@poliba.it

Technical Staff

Sergio De Gioia

sergio.degioia@poliba.it

Companies and Institutions

1. Leonardo SpA– Land & Naval Defence Division -Taranto

2. Autorità Portuale - Taranto

3. Arsenale Militare di Taranto

4. Alenia Aermacchi - Grottaglie (TA)

Projects

1. Progetto PON R&I 2014-2020 –“NSG: New Satellites Generation Components”, Area di specializzazione “Aerospazio”, 2018-2020

2. Progetto PON R&I 2014-2020 “CLOSE to the Earth ‐ CLOSE”, Area di specializzazione “Aerospazio

3. Progetto PON R&I 2014- “FURTHER - FUture Rivoluzionarie Tecnologie per velivoli più Elettrici” Area di specializzazione “Aerospazio, 2018-2020

4. Progetto PON R&I 2014-2020 “MITIGO- Sistemi integrati per la mitigazione del rischio idrogeologico e sismico di pendii, strutture e infrastrutture strategiche in contesti geomorfologici tipici dell’Italia Meridionale”, 2018-2020

Facilities

1. Basic measurement instruments (digital oscilloscopes, arbitrary waveform generators, power supplies, ADC boards)

2. Test benches for UAV characterization

3. SCADA/HMI Systems for industrial automation

4. metrology room with controlled temperature and humidity

Softwares

1. Mathworks MATLAB

2. National Instruments LabVIEW

Services

teaching,

Internship

prototyping

StakeHolder

Address / How to reach us

Viale del turismo, 4 74100 Taranto Main building, 2nd floor

Hours

Mon – Fri, 8.00 AM - 7.00 PM

E&EMR Lab

mario.savino — Wed, 06 Feb 2019 07:50:02 +0000

E&EMR Lab mario.savino Wed, 02/06/2019 - 08:50

Lab full name

The Electrical and Electronic Measurement Research Lab

ERC 2nd Level Code

ERC 3rd level Code

PE7_2 Electrical engineering: power components and/or systems

PE7_11 Components and systems for applications

Research Activities

The Electrical and Electronic Measurement Lab activities are, among others, mainly focused on two institutional objectives: didactics for bachelor/master of science/doctoral degree and applied as well as theoretical research in the areas of: A/D conversion, Power Quality assessment, Sensors and actuators, Time- and Frequency-Domain Digital Signal processing, measurement uncertainty evaluation and metrology.

The Lab is equipped with a large variety of generic and specialized laboratory facilities: from basic instruments (digital oscilloscopes, arbitrary waveform generators, power supplies, etc.) for low frequency applications, to advanced ones for signal generation and analysis up to the gigahertz range of frequencies. Advanced thermal imaging diagnostic instruments and a mid-sized (about 250 liters) climatic chamber are also available.

The following is a non-exhaustive list of skills of the research group members:

- ADCs (Analog to Digital Converters) error modeling and correction;
- Design and prototipation of PC-, microcontroller- and DSP-based mixed signals Data Acquisition (DAQ) and processing systems;
- Industrial circuits, PLC programming and machines diagnostic for faults prevention;
- Wireless Sensor Networks (WSN) design and prototipation;
- Mains signals (both high voltages and high currents) sensing, digitization and DSP-based numerical processing for real-time energy quality assessment for the alternative energies market;
- Marine water purity measurements for early detection of Ostreopsis Ovatae algae eutrophication and other man-related pollution phenomena;
- Energy harvesting and energy monitoring from renewable sources;
- Characterization of UAVs (Unmanned Aerial Vehicles) and of their sub-systems for health status assessment, reliability and pre-flight check;
- Time Domain Reflectometry measurement system and waveform analysis;
- Cross-platform and web-based Rapid Application Development for ATE Systems (Automated Test Equipment) with Microsoft Visual Studio, Embarcadero RAD Studio, Android Studio, Eclipse, etc.
- Hardware and Software design of SCADA/HMI Systems for industrial automation;
- PCB design for mixed signals circuits with industrial standard EDA Tools (Altium Designer, Eagle CAD, KiCAD, etc.); - Firmware development and debugging for a large variety of industry-standard 8-/16-/32-bits microcontrollers and DSPs (Microchip AVR/dsPIC/PICmicro, ARM Cortex-Mx, Texas Instruments C6748, etc.);
- Statistical techniques for measurement uncertainty assessment and instrument calibration.

The Lab works continuously with important Italian companies in order to carry out technology transfer projects and collaborate with international scholars for advanced scientific research.

For further info, please visit http://misure.poliba.it.

Department

Contact Person

Mario Savino

mario.savino@poliba.it

Companies and Institutions

MERMEC S.p.A. - Monopoli

SITAEL S.p.A. - Mola di Bari

MASMEC S.p.A. - Bari

SIPAL S.p.A. - Torino

Altanet S.r.l. - Altamura

ApuliaBiotech - Bari

DPM Elettronica S.r.l. - Foggia

Nardò Technical Center – Porche Engineering - Nardò (LE)

Centro Studi Componenti per Veicoli S.p.A.(CVIT) - Gruppo BOSCH – Modugno (BA)

Low Frequency Measurement Group – Department of Electronics and Telecomunications del Politecnico di Torino

Departamento de Electrónica, Automática y Comunicaciones - Universidad Pontificia Comillas - Madrid

MOE

francesco.prudenzano — Wed, 16 Jan 2019 09:37:18 +0000

MOE francesco.prudenzano Wed, 01/16/2019 - 10:37

Lab full name

Microwave and Optical Engineering

ERC 2nd Level Code

ERC 3rd level Code

PE7_5 (Micro and nano) electronic, optoelectronic and photonic components

PE7_6 Communication technology, high-frequency technology

PE7_11 Components and systems for applications

Research Activities

The research activities of Electromagnetic Fields and Telecommunications Laboratory at Magna Grecia Center in Taranto and of Microwave and Optical Engineering (MOE) Laboratory in Bari are performed by the Microwave and Optical Engineering (MOE) group (http://moe-group.poliba.it/). They are pertaining to the following main topics:

MICROWAVE - Design, fabrication and characterization of antennas and microwave devices for aerospace and communication; substrate integrated waveguide devices (SIW); measurement of electromagnetic compatibility, electromagnetic exposure investigation, bio-compatibility. Microwave applicators for thermal ablation medical therapy. Modeling of accelerating cavities for proton linear accelerators (LINAC) for medical proton-therapy.

Lab main microwave facilities:

1. LPKF ProtoLaser U3 for Rapid PCB Prototyping;

2. Anechoic chamber StarLab Antenna Test Station (SL18), 800 MHz to 18 GHz, automated anechoic chamber;

3. LPKF MiniContac RS Electroplating of Through-Holes;

4. LPKF MultiPress S: Press for Producing Multilayers (up to 8 layers);

5. R&S ESU EMI Test ReceiverESU26: standard-compliant EMI test receiver + high-end spectrum analyzer, 20 Hz to 26.5 GHz, full compliance with CISPR 16-1-1 standard;

6. R&S ENV216 LISN two-line V-network for disturbance voltage measurements on single-phase EUTs: 9 kHz - 30 MHz, isolation > 40 dB, max continuous current 16 A, high-pass filter 150 kHz;

7. E.M. field power meter: Narda 8053-2004/40 portable EM fields meter: E-field 100 kHz÷7 GHz, H-field 5 Hz÷400 kHz;

8. Narda Area Monitor System 2600: Remote Monitoring of Electromagnetic Fields; E-field 100 kHz÷7 GHz, H-field 5 Hz÷100 kHz;

9. Near field probes: active broadband probes for EMI diagnosis for frequencies of up to 1 GHz, H-field probe, High-impedance probe, E-field probe;

10. Microwave Network Analyzer Agilent N5224A PNA 10 MHz to 43.5 GHz, 2-ports;

11. Rohde&Schwarz R&S FSH3 handheld Spectrum Analyzer: 100 kHz to 3 GHz, resolution bandwidth 1 Hz, distance to fault measurement option, two-port measurements with tracking generator;

12. Vector Network Analyzer Agilent FieldFox N9917A, 30kHz-18GHz;

13. OscilloscopeTektronik TSD1002, Bandwidth 60 MHz, 2-channel

14. R&S SMB100A RF and Microwave Signal Generator: 100 kHz to 20 GHz, AM, FM and Pulse modulator, Pulse generator, Pulse train;

15. Function generator Instek GFG-8210: 0.1Hz-10MHz;

16. Dielectric probe kit SPEAG for dielectric constant measurement 10MHz-50GHz;

17. Weller soldering station WSD-081;

18. Printer Ink-Jet EcoTank ET-M1170 for flexible circuit printing on Novele IJ-220 coated PET substrate;

19. Antennas: R&S HL050 Antenna: Log-Periodic Directional Antenna for linear polarization: 850 MHz to 26.5 GHz, input impedance 50 W, VSWR≤2.5, gain=8.5 dBi; R&S HF907 Antenna: Double-Ridged Waveguide Horn Antenna: broadband directional antenna for EMC measurements: 0.8 GHz to 18 GHz input impedance 50 W, VSWR≤2.0, gain=5÷14 dBi; R&S HL040 Antenna: Log-periodic broadband antenna: 400 MHz to 3 GHz input impedance 50 W, VSWR≤2.0, gain=5÷7 dBi.

OPTICS - Design, fabrication and characterization of fiber lasers. Modeling of photonic crystal fibers (PCF), for near infrared (NIR) and medium infrared (MID-IR) applications. Modeling of innovative materials and rare earth doped optical devices in optical fiber and in planar optics; nonlinear device modeling; optical microresonators; design, fabrication and characterization of optical devices for environmental monitoring and biomedicine.

Lab main optical facilities:

1. Vytran GPX-2400 Splicer GPX PTR Fiber Optic Glass Processing Unit;

2. Automatic Cleaver Vytran LDC-400;

3. Fiber Optic Recoater PTR-200;

4. Ytterbium fiber Lasers CW 30 W and CW 100 W, with chiller Liekky;

5. Lightwave Component Analyzer HP 8703A 1300 nm/ 130 MHz – 20 GHz;

6. Light Source deuterium-halogen Ocean Optics DH-2000-S DUV: deuterium lamp 210–400 nm; halogen lamp 300–1500 nm;

7. SLED diode, wavelength 1550nm, Output power 15mW (typ.), Bandwidth 45nm (typ.), current 300mA, output Gaussian, package 14-BTF;

8. Nanoplus Mid-IR ICL;

9. Infrared Chamber;

10. EDFA;

11. UV-VIS Ocean Optics spectrometer HR4000;

12. equipped optical benches;

13. Nanoscan M2 beam quality measurement;

14. Farfield Beam Profiler Ophir® Pyrocam IIIHR;

15. Optical spectrum Analyzer 350-1000 nm, resolution up to 1 pm; Fast sweep time; max input level: ± 10 dBm;

16. FBGA interrogator module with USB 2.0 interface, Spectral Range: 1525-1565nm

17. OSA205C - Fourier Transform Optical Spectrum Analyzer, 1.0 - 5.6 µm

Department

francesco.prudenzano@poliba.it

Contact Person

Francesco Prudenzano

Technical Staff

Antonio Crudele

antonio.crudele@poliba.it

Companies and Institutions

District of Manduria (TA), District of Statte (TA), District of Volturino (FG), MISE – Bari.

IUT University du Main, L'Institut d'Electronique et des Technologies du numéRique (IETR) Rennes, University of Nice, Università Politecnica delle Marche

MERMEC/SITAEL, SOMACIS, ITEL, OPTEL InP, Dyrecta, Leanfa, EMITECH, SAFRAN.

Università di Rennes1 - Francia; UMR-CNRS - Institut de Physique de Rennes (IPR) – France;

Institut de Recherche en Ingénierie Moléculaire et Matériaux Fonctionnels, UMR CNRS - Le Mans - France; laboratoire de Physique de l'Université de Bourgogne - France;

Physics Dep. Shiraz University, Shiraz - Iran; The Institute for Photonics & Advanced Sensing (IPAS), Centre of Expertise in Photonics (CoEP) University of Adelaide - Australia; University of Tokyo – Giappone;

Mesures Physiques Department- IUT Institut Universitaire de Technologie du Mans – Francia; INFM – Lecce; CNR-FSA – Trento; IROE-CNR - Firenze Politecnico di Milano; Politecnico di Torino;

Dept. of Applied Sciences, Ho Chi Minh City University of Technology and Education, Vietnam; IFN-CNR CSMFO Lab. and FBK Photonics Unit, Povo-Trento, Materials Physics Center CSIC-UPV/EHU San Sebastian, Spain;

Institute of Low Temperature and Structure Research, PAS, Wroclaw, Poland; Swansea University (UK), Nottingham University (UK)

La Verre Fluorè, ATLAS, FYLA, SELENOPTICS, Somacis, Emitech, Neetra, RTM, Quanta System, Centro Laser.

Projects

PON R&C 2007-2013 “Sviluppo di tecnologie in guida d’onda integrata (SIW) per applicazioni ICT a microonde” – Asse I - Azione II - Avviso D.D. n.01/Ric. del 18/01/2010

Potenziamento delle strutture e delle dotazioni scientifiche e tecnologiche del polo scientifico e tecnologico Magna Grecia" (Sez. Campi e.m

PON02_00576_3329762/1 "Development of innovative small size systems for radiotherapy (AMIDERHA)"

Horizon 2020 – PON 2014/2020 “Advanced Radiotherapy with hadrons (EHRA)"”

Research activity AR - A.2.1.1 Research Activity Title “Analisys and electromagnetic design of an applicator for thermal ablation” within the project FESR-FSE 2014-2020 “SINACH – Integrated navigation for mini invasive, surgery”

Research activity Task 3.3 Research Activity Title “Fiber optic systems for space application” – 30 months duration, within the project PON “New Satellite Generation Components (NSG)"

Research activities OR3 (A 3.5 e A 3.6) OR2 (A 2.1) of the electromagnetic field group within the MIUR project “Agriculture Green & Digital – AGREED”

Research activities of WP7 Fibre Pigtailing & Combining, of the project H2020 “PASSEPARTOUT Photonic Accurate and Portable Sensor Systems Exploiting Photo-Acoustic and Photo-Thermal Based Spectroscopy for Real-Time Outdoor Air Pollution Monitoring”

“Fast monitoring of aflatoxines in milk” pertaining to the optimization of a portable spectroscopy set up - contract between the DEE - Department of Electrical and Electronic Engineering of Politecnico di Bari and Plurima Software SRL

MIUR PRIN 2022, NRPP – DD n. 1181 del 27-07-2023 - InnoVative tEchnoloGies for non-invasivE assessment of plAnt healTh conditIon to support precisiOn farmiNg “VEGETATION”

European Union under the Italian National Recovery and Resilience Plan (NRRP) of NextGenerationEU, with reference to the partnership on “Telecommunications of the Future” (PE00000001 - program “RESTART”, CUP: D93C22000910001) - STRUCTURAL PROJECT DREAMS

ASI 687/2022 - MUR 341 15/03/22 “SPACE IT UP”

ASI 2024-68-I.0 “Origami Reconfigurable Beam-steering Antennas with METAsurfaces for Communication on Small Satellites - ORBIT-META”

HORIZON TMA MSCA Staff Exchanges (101182995) “Cr4+:YAG/Polymer nanocomposite as alternative materials for Q-switched lasers: properties, modeling, and applications - ALTER-Q”

Softwares

Computer codes based on Transfer Matrix Method (TMM), Finite Element Method (FEM), Beam Propagation method (BPM), finite difference time domain (FDTD), Method of Moment (MoM)

CST, COMSOL, BEAMPROP

Services

Design of microwave devices and planar antennas for enterprises

Planning and optimization of electromagnetic field covering for mobile phone aims and identification of BTS geographical position

Measurement of electromagnetic field level at low (50Hz) and high frequency (2-20GHz), control of human exposure to the electromagnetic field

Study of biological effects due to the human exposure to the electromagnetic field

StakeHolder

http://moe-group.poliba.it/

Ph.D. Student

Researcher

Address / How to reach us

Laboratorio ex DIASS; Viale Turismo 8, Taranto

DEI sede storica, 2° piano; Via Orabona 4, BARI

DEI Plesso Salvatore, piano terra; Via Orabona 4, BARI

Hours

9:00-17:00

Area (mq)

100

Link to external content

EDLab

annagina.perri — Tue, 08 Jan 2019 10:50:11 +0000

EDLab annagina.perri Tue, 01/08/2019 - 11:50

Lab full name

laboratory of electronic devices

ERC 2nd Level Code

ERC 3rd level Code

PE7_4 (Micro and nano) systems engineering

PE7_5 (Micro and nano) electronic, optoelectronic and photonic components

Research Activities

Development of Micro and Nano Devices models for Computer Aided Design and their Characterization

Department

Contact Person

Anna Gina Perri

annagina.perri@poliba.it

Technical Staff

Gennaro Gelao

gennaro.gelao@poliba.it

Companies and Institutions

National Research Council (CNR)

Institute of Intelligent Industrial Technologies and Systems for Advanced Manufacturing (STIIMA) Bari, 70125, Italy

Projects

Design and optimization of FETs on Carbon Nanotubes for biomedical applications (2019-2021)

Funding

Funds FRA of Polytechnic University of Bari

Facilities

Probe Station Cascade microtech Alessi

Digitizing Oscilloscope HP54750A

Services

Characterization of electronic devices aimed at the development and implementation of new electrothermal models and experimental characterization up to 50 GHz of electronic devices at hyperfrequencies, through Probe Station RF1 and HP oscilloscope with @ 50 GHz plug

Design of micro-resonators on PBG for particle accelerators in tumor adrotherapy and related experimental characterization, also in cryogenics

Characterization, design and testing of nanometric electronic systems and FET on carbon nanotubes

Students support the use of the PSPICE circuit simulator with related demonstration exercises

Support to students for graduation theses and exam papers for the development of models in Verilog-A and Spice of advanced electronic devices such as FET on carbon nanotube, with particular attention to thermal problems

StakeHolder