PE7_11 Components and systems for applications

PE7_3 Simulation engineering and modelling

ERC 3rd level Code

PE7_4 (Micro and nano) systems engineering

Research Activities

The lab has long been involved in the development and characterization of multichannel integrated circuits for read-out of solid-state detectors and sensors for high energy physics and medical imaging. Another related activity is the characterization of detectors, sensors and electronic devices. In more detail, the main current research lines are the following:

Design of multichannel mixed-signal integrated circuits (ASIC) for the read-out of solid-state detectors used in high energy physics experiments and medical imaging applications

Development of sensor interface electronics for environmental monitoring
Prototyping (via access to the European consortium EUROPRACTICE) and characterization of integrated circuits
Design and realization of hardware/firmware systems based on programmable devices (FPGA)
Characterization of solid-state detectors for physics experiments and medical imaging applications (Silicon Photomultipliers)

Department

cristoforo.marzocca@poliba.it

Contact Person

Cristoforo Marzocca

Technical Staff

Vincenzo Scarola, Gennaro Gelao

vincenzo.scarola@poliba.it

Companies and Institutions

SLAC Stanford, Menlo Park (CA, USA)

CERN, Geneva (Switzerland)

Munster Technological University, Cork (Ireland)

Istituto Nazionale di Fisica Nucleare

Fbk-IRST, Trento

AVIO AERO, Bari

ETG Risorse, Chivasso (To)

ITEL, Ruvo di Puglia

Matrix s.r.l., Conversano (Ba)

Cupersafety s.r.l., Conversano (Ba)

Microlaben s.r.l.(spin-off company of Politecnico di Bari)

Projects

CMS experiment (CERN – Geneva)

H2020 “PASSEPARTOUT” (European Community)

H2020 "EVOQUE" (European Community)

POC "SPHERE" PNRR

Research contract “Collaboration on the development of a Time-of-Flight (ToF) readout system for Silicon Photon Multipliers” (SLAC Stanford)

Innolabs “Sistema partecipativo attivo per la sensibilizzazione delle comunità al rischio di esposizione al GAS RADON” (Apulia Regional government)

PON “FURTHER - FUture Rivoluzionarie Tecnologie per velivoli più Elettrici” (MIUR)

Funding

MIUR – 445 k€

SLAC Stanford – 34 k€

Apulia Regional government – 20 k€

European Community – 120 k€

Politecnico di Bari – 6 k€

Facilities

-Linux workstations for IC design, equipped with the suite Cadence IC

-Semi-automatic probestation Karl Suss PM8, optical microscope 50X Karl Suss

-Logic state analyzer Tektronix, 32 channels

-Semiconductor parameter analyzers HP4145B and 4155B

-Spectrum analyzer Agilent N1996A, 100kHz-6GHz

-Oscilloscope DPO Tektronix 4GHz, 4 channels

-Oscilloscope Rohde-Schwarz 4GHz, 4 channels

-Arbitrary signal generator Tektronix, 200MHz

-Standard lab instrumentation (stabilized power supplies, digital multimeters, low-end oscilloscopes and function generators)

Softwares

Suite Cadence IC for electronic design

Services

IC design and prototyping, via EUROPRACTICE service (only for research and educational purposes, no commercial activities)

StakeHolder

Graduate

Tecnnical Administrative Staff

Visitor

Address / How to reach us

Via Orabona 4, 70125 – Bari (Italy)

Dipartimento di Ingegneria Elettrica e dell’Informazione

Plesso Salvatore, IV floor

DEI main building, II floor

Hours

Mon - Fri 9:00 - 17:30

Area (mq)

E&EMR Lab

mario.savino — Wed, 06 Feb 2019 07:50:02 +0000

E&EMR Lab mario.savino Wed, 02/06/2019 - 08:50

Lab full name

The Electrical and Electronic Measurement Research Lab

ERC 2nd Level Code

PE7_3 Simulation engineering and modelling

ERC 3rd level Code

PE7_2 Electrical engineering: power components and/or systems

Research Activities

The Electrical and Electronic Measurement Lab activities are, among others, mainly focused on two institutional objectives: didactics for bachelor/master of science/doctoral degree and applied as well as theoretical research in the areas of: A/D conversion, Power Quality assessment, Sensors and actuators, Time- and Frequency-Domain Digital Signal processing, measurement uncertainty evaluation and metrology.

The Lab is equipped with a large variety of generic and specialized laboratory facilities: from basic instruments (digital oscilloscopes, arbitrary waveform generators, power supplies, etc.) for low frequency applications, to advanced ones for signal generation and analysis up to the gigahertz range of frequencies. Advanced thermal imaging diagnostic instruments and a mid-sized (about 250 liters) climatic chamber are also available.

The following is a non-exhaustive list of skills of the research group members:

- ADCs (Analog to Digital Converters) error modeling and correction;
- Design and prototipation of PC-, microcontroller- and DSP-based mixed signals Data Acquisition (DAQ) and processing systems;
- Industrial circuits, PLC programming and machines diagnostic for faults prevention;
- Wireless Sensor Networks (WSN) design and prototipation;
- Mains signals (both high voltages and high currents) sensing, digitization and DSP-based numerical processing for real-time energy quality assessment for the alternative energies market;
- Marine water purity measurements for early detection of Ostreopsis Ovatae algae eutrophication and other man-related pollution phenomena;
- Energy harvesting and energy monitoring from renewable sources;
- Characterization of UAVs (Unmanned Aerial Vehicles) and of their sub-systems for health status assessment, reliability and pre-flight check;
- Time Domain Reflectometry measurement system and waveform analysis;
- Cross-platform and web-based Rapid Application Development for ATE Systems (Automated Test Equipment) with Microsoft Visual Studio, Embarcadero RAD Studio, Android Studio, Eclipse, etc.
- Hardware and Software design of SCADA/HMI Systems for industrial automation;
- PCB design for mixed signals circuits with industrial standard EDA Tools (Altium Designer, Eagle CAD, KiCAD, etc.); - Firmware development and debugging for a large variety of industry-standard 8-/16-/32-bits microcontrollers and DSPs (Microchip AVR/dsPIC/PICmicro, ARM Cortex-Mx, Texas Instruments C6748, etc.);
- Statistical techniques for measurement uncertainty assessment and instrument calibration.

The Lab works continuously with important Italian companies in order to carry out technology transfer projects and collaborate with international scholars for advanced scientific research.

For further info, please visit http://misure.poliba.it.

Department

Contact Person

Mario Savino

mario.savino@poliba.it

Companies and Institutions

MERMEC S.p.A. - Monopoli

SITAEL S.p.A. - Mola di Bari

MASMEC S.p.A. - Bari

SIPAL S.p.A. - Torino

Altanet S.r.l. - Altamura

ApuliaBiotech - Bari

DPM Elettronica S.r.l. - Foggia

Nardò Technical Center – Porche Engineering - Nardò (LE)

Centro Studi Componenti per Veicoli S.p.A.(CVIT) - Gruppo BOSCH – Modugno (BA)

Low Frequency Measurement Group – Department of Electronics and Telecomunications del Politecnico di Torino

Departamento de Electrónica, Automática y Comunicaciones - Universidad Pontificia Comillas - Madrid

ETLC Lab

gianfranco.avitabile — Tue, 05 Feb 2019 11:02:32 +0000

ETLC Lab gianfranco.avitabile Tue, 02/05/2019 - 12:02

Lab full name

Electronics for Telecommunications

ERC 2nd Level Code

ERC 3rd level Code

PE7_5 (Micro and nano) electronic, optoelectronic and photonic components

PE7_6 Communication technology, high-frequency technology

Research Activities

Electronics for Telecommunications Lab (ETL) focuses on studying, designing and deploying innovative electronic systems for telecommunications, operating at high frequencies. Main research fields deals with Internet of Things (IoT), indoor and outdoor positioning systems and smart-health.

During the years, the lab developed agreements with the most important electronics and telecommunications industries, like Texas Instruments Europe. Also, the ETL group participated national and international research projects.

With his test benches, CAD tools and measurement instruments, ETL has the possibility of developing the most interesting and innovative approaches to research problems resolution in the fields of high frequency electronics.

The ETL group is also active on teaching, bringing the new solutions coming from research to engineering students, who will become the engineers of tomorrow. RF, microwave and mm-wave component and circuit design - hybrid and ASIC developments.
The main activities are:

TLC system design and integration for personal communications, industrial and medical applications.
Integrated sensors wireless unit development for environmental monitoring.

Department

gianfranco.avitabile@poliba.it

Contact Person

Gianfranco Avitabile

Technical Staff

Coviello Giuseppe

giuseppe.coviello@poliba.it

Companies and Institutions

IMT srl

GST

BEST srl

GST

Projects

Technologies for Innovative Therapeutic Approacches in the chronic patient care (Tech.Inn.Th.App.)

Funding

Regione Puglia - 159.426,00€

Facilities

3 oscilloscopes including 1 up to 3GHz

A spectrum analyzer up to 26.5 GHz

A network analyzer up to 26.5 GHz

A waveform generator up to 6 GHz

A waveform generator up to 4G Hz

A logic analyzer up to 125 MHz

6 dual voltage generators up to 32V

1 LPKF Protomat C60 micro-cutter

1 bench for welding SMD components made up of 4 welders

hot air rework station

PLA 3D printer

14 personal computers

2 printers

Softwares

Advanced design systems

CubeMx

MATLAB®/Simulink

Quartus

CodeWarrior

Services

System design and prototype development

Test and validation Measurements

StakeHolder

Boards

External Collaborators

Graduate

https://etlclab.poliba.it/

Address / How to reach us

Laboratory of Electronics for Telecommunications – DEI – Polytechnic of Bari

Hours

From Monday to Friday: 9:00-19:00

Area (mq)

Link to external content

ESP Lab

maria.rizzi — Fri, 18 Jan 2019 08:47:56 +0000

ESP Lab maria.rizzi Fri, 01/18/2019 - 09:47

Lab full name

Electronics for Signal Processing Laboratory

ERC 2nd Level Code

ERC 3rd level Code

PE7_7 Signal processing

Research Activities

1. Complex digital circuits
2. Automated processing of digital images
3. Automated processing of real-time one-dimensional signals .
4. Computer Aided Detection and Diagnosis systems
5. Monitoring

Department

http://193.204.50.76/DEI-it/ricerca/esplab.html

Contact Person

Maria Rizzi

maria.rizzi@poliba.it

Companies and Institutions

INNOIT srl

Masvis srl

Uniba

SSTLab

Diamech Technology

AI2

1200 elettronica

Planetek

iVIS Technologies

Neetra

Omnitech

Leanfa

MyHermes

STIIMA - CNR

IRSA – CNR

Università di Bari

Services

Analysis and synthesis of complex digital systems

Development of procedures for signal processing in biomedical and environmental field

Methodologies and architectures for monitoring

Address / How to reach us

DEI - Via Orabona 4 - Bari

Hours

9:00-16:00

Link to external content

MOE

francesco.prudenzano — Wed, 16 Jan 2019 09:37:18 +0000

MOE francesco.prudenzano Wed, 01/16/2019 - 10:37

Lab full name

Microwave and Optical Engineering

ERC 2nd Level Code

PE7_3 Simulation engineering and modelling

ERC 3rd level Code

PE7_5 (Micro and nano) electronic, optoelectronic and photonic components

PE7_6 Communication technology, high-frequency technology

Research Activities

The research activities of Electromagnetic Fields and Telecommunications Laboratory at Magna Grecia Center in Taranto and of Microwave and Optical Engineering (MOE) Laboratory in Bari are performed by the Microwave and Optical Engineering (MOE) group (http://moe-group.poliba.it/). They are pertaining to the following main topics:

MICROWAVE - Design, fabrication and characterization of antennas and microwave devices for aerospace and communication; substrate integrated waveguide devices (SIW); measurement of electromagnetic compatibility, electromagnetic exposure investigation, bio-compatibility. Microwave applicators for thermal ablation medical therapy. Modeling of accelerating cavities for proton linear accelerators (LINAC) for medical proton-therapy.

Lab main microwave facilities:

1. LPKF ProtoLaser U3 for Rapid PCB Prototyping;

2. Anechoic chamber StarLab Antenna Test Station (SL18), 800 MHz to 18 GHz, automated anechoic chamber;

3. LPKF MiniContac RS Electroplating of Through-Holes;

4. LPKF MultiPress S: Press for Producing Multilayers (up to 8 layers);

5. R&S ESU EMI Test ReceiverESU26: standard-compliant EMI test receiver + high-end spectrum analyzer, 20 Hz to 26.5 GHz, full compliance with CISPR 16-1-1 standard;

6. R&S ENV216 LISN two-line V-network for disturbance voltage measurements on single-phase EUTs: 9 kHz - 30 MHz, isolation > 40 dB, max continuous current 16 A, high-pass filter 150 kHz;

7. E.M. field power meter: Narda 8053-2004/40 portable EM fields meter: E-field 100 kHz÷7 GHz, H-field 5 Hz÷400 kHz;

8. Narda Area Monitor System 2600: Remote Monitoring of Electromagnetic Fields; E-field 100 kHz÷7 GHz, H-field 5 Hz÷100 kHz;

9. Near field probes: active broadband probes for EMI diagnosis for frequencies of up to 1 GHz, H-field probe, High-impedance probe, E-field probe;

10. Microwave Network Analyzer Agilent N5224A PNA 10 MHz to 43.5 GHz, 2-ports;

11. Rohde&Schwarz R&S FSH3 handheld Spectrum Analyzer: 100 kHz to 3 GHz, resolution bandwidth 1 Hz, distance to fault measurement option, two-port measurements with tracking generator;

12. Vector Network Analyzer Agilent FieldFox N9917A, 30kHz-18GHz;

13. OscilloscopeTektronik TSD1002, Bandwidth 60 MHz, 2-channel

14. R&S SMB100A RF and Microwave Signal Generator: 100 kHz to 20 GHz, AM, FM and Pulse modulator, Pulse generator, Pulse train;

15. Function generator Instek GFG-8210: 0.1Hz-10MHz;

16. Dielectric probe kit SPEAG for dielectric constant measurement 10MHz-50GHz;

17. Weller soldering station WSD-081;

18. Printer Ink-Jet EcoTank ET-M1170 for flexible circuit printing on Novele IJ-220 coated PET substrate;

19. Antennas: R&S HL050 Antenna: Log-Periodic Directional Antenna for linear polarization: 850 MHz to 26.5 GHz, input impedance 50 W, VSWR≤2.5, gain=8.5 dBi; R&S HF907 Antenna: Double-Ridged Waveguide Horn Antenna: broadband directional antenna for EMC measurements: 0.8 GHz to 18 GHz input impedance 50 W, VSWR≤2.0, gain=5÷14 dBi; R&S HL040 Antenna: Log-periodic broadband antenna: 400 MHz to 3 GHz input impedance 50 W, VSWR≤2.0, gain=5÷7 dBi.

OPTICS - Design, fabrication and characterization of fiber lasers. Modeling of photonic crystal fibers (PCF), for near infrared (NIR) and medium infrared (MID-IR) applications. Modeling of innovative materials and rare earth doped optical devices in optical fiber and in planar optics; nonlinear device modeling; optical microresonators; design, fabrication and characterization of optical devices for environmental monitoring and biomedicine.

Lab main optical facilities:

1. Vytran GPX-2400 Splicer GPX PTR Fiber Optic Glass Processing Unit;

2. Automatic Cleaver Vytran LDC-400;

3. Fiber Optic Recoater PTR-200;

4. Ytterbium fiber Lasers CW 30 W and CW 100 W, with chiller Liekky;

5. Lightwave Component Analyzer HP 8703A 1300 nm/ 130 MHz – 20 GHz;

6. Light Source deuterium-halogen Ocean Optics DH-2000-S DUV: deuterium lamp 210–400 nm; halogen lamp 300–1500 nm;

7. SLED diode, wavelength 1550nm, Output power 15mW (typ.), Bandwidth 45nm (typ.), current 300mA, output Gaussian, package 14-BTF;

8. Nanoplus Mid-IR ICL;

9. Infrared Chamber;

10. EDFA;

11. UV-VIS Ocean Optics spectrometer HR4000;

12. equipped optical benches;

13. Nanoscan M2 beam quality measurement;

14. Farfield Beam Profiler Ophir® Pyrocam IIIHR;

15. Optical spectrum Analyzer 350-1000 nm, resolution up to 1 pm; Fast sweep time; max input level: ± 10 dBm;

16. FBGA interrogator module with USB 2.0 interface, Spectral Range: 1525-1565nm

17. OSA205C - Fourier Transform Optical Spectrum Analyzer, 1.0 - 5.6 µm

Department

francesco.prudenzano@poliba.it

Contact Person

Francesco Prudenzano

Technical Staff

Antonio Crudele

antonio.crudele@poliba.it

Companies and Institutions

District of Manduria (TA), District of Statte (TA), District of Volturino (FG), MISE – Bari.

IUT University du Main, L'Institut d'Electronique et des Technologies du numéRique (IETR) Rennes, University of Nice, Università Politecnica delle Marche

MERMEC/SITAEL, SOMACIS, ITEL, OPTEL InP, Dyrecta, Leanfa, EMITECH, SAFRAN.

Università di Rennes1 - Francia; UMR-CNRS - Institut de Physique de Rennes (IPR) – France;

Institut de Recherche en Ingénierie Moléculaire et Matériaux Fonctionnels, UMR CNRS - Le Mans - France; laboratoire de Physique de l'Université de Bourgogne - France;

Physics Dep. Shiraz University, Shiraz - Iran; The Institute for Photonics & Advanced Sensing (IPAS), Centre of Expertise in Photonics (CoEP) University of Adelaide - Australia; University of Tokyo – Giappone;

Mesures Physiques Department- IUT Institut Universitaire de Technologie du Mans – Francia; INFM – Lecce; CNR-FSA – Trento; IROE-CNR - Firenze Politecnico di Milano; Politecnico di Torino;

Dept. of Applied Sciences, Ho Chi Minh City University of Technology and Education, Vietnam; IFN-CNR CSMFO Lab. and FBK Photonics Unit, Povo-Trento, Materials Physics Center CSIC-UPV/EHU San Sebastian, Spain;

Institute of Low Temperature and Structure Research, PAS, Wroclaw, Poland; Swansea University (UK), Nottingham University (UK)

La Verre Fluorè, ATLAS, FYLA, SELENOPTICS, Somacis, Emitech, Neetra, RTM, Quanta System, Centro Laser.

Projects

PON R&C 2007-2013 “Sviluppo di tecnologie in guida d’onda integrata (SIW) per applicazioni ICT a microonde” – Asse I - Azione II - Avviso D.D. n.01/Ric. del 18/01/2010

Potenziamento delle strutture e delle dotazioni scientifiche e tecnologiche del polo scientifico e tecnologico Magna Grecia" (Sez. Campi e.m

PON02_00576_3329762/1 "Development of innovative small size systems for radiotherapy (AMIDERHA)"

Horizon 2020 – PON 2014/2020 “Advanced Radiotherapy with hadrons (EHRA)"”

Research activity AR - A.2.1.1 Research Activity Title “Analisys and electromagnetic design of an applicator for thermal ablation” within the project FESR-FSE 2014-2020 “SINACH – Integrated navigation for mini invasive, surgery”

Research activity Task 3.3 Research Activity Title “Fiber optic systems for space application” – 30 months duration, within the project PON “New Satellite Generation Components (NSG)"

Research activities OR3 (A 3.5 e A 3.6) OR2 (A 2.1) of the electromagnetic field group within the MIUR project “Agriculture Green & Digital – AGREED”

Research activities of WP7 Fibre Pigtailing & Combining, of the project H2020 “PASSEPARTOUT Photonic Accurate and Portable Sensor Systems Exploiting Photo-Acoustic and Photo-Thermal Based Spectroscopy for Real-Time Outdoor Air Pollution Monitoring”

“Fast monitoring of aflatoxines in milk” pertaining to the optimization of a portable spectroscopy set up - contract between the DEE - Department of Electrical and Electronic Engineering of Politecnico di Bari and Plurima Software SRL

MIUR PRIN 2022, NRPP – DD n. 1181 del 27-07-2023 - InnoVative tEchnoloGies for non-invasivE assessment of plAnt healTh conditIon to support precisiOn farmiNg “VEGETATION”

European Union under the Italian National Recovery and Resilience Plan (NRRP) of NextGenerationEU, with reference to the partnership on “Telecommunications of the Future” (PE00000001 - program “RESTART”, CUP: D93C22000910001) - STRUCTURAL PROJECT DREAMS

ASI 687/2022 - MUR 341 15/03/22 “SPACE IT UP”

ASI 2024-68-I.0 “Origami Reconfigurable Beam-steering Antennas with METAsurfaces for Communication on Small Satellites - ORBIT-META”

HORIZON TMA MSCA Staff Exchanges (101182995) “Cr4+:YAG/Polymer nanocomposite as alternative materials for Q-switched lasers: properties, modeling, and applications - ALTER-Q”

Softwares

Computer codes based on Transfer Matrix Method (TMM), Finite Element Method (FEM), Beam Propagation method (BPM), finite difference time domain (FDTD), Method of Moment (MoM)

CST, COMSOL, BEAMPROP

Services

Design of microwave devices and planar antennas for enterprises

Planning and optimization of electromagnetic field covering for mobile phone aims and identification of BTS geographical position

Measurement of electromagnetic field level at low (50Hz) and high frequency (2-20GHz), control of human exposure to the electromagnetic field

Study of biological effects due to the human exposure to the electromagnetic field

StakeHolder

Boards

External Collaborators

http://moe-group.poliba.it/

Ph.D. Student

Researcher

Address / How to reach us

Laboratorio ex DIASS; Viale Turismo 8, Taranto

DEI sede storica, 2° piano; Via Orabona 4, BARI

DEI Plesso Salvatore, piano terra; Via Orabona 4, BARI

Hours

9:00-17:00

Area (mq)

100

Link to external content

ELEDIGILAB

agostino.giorgio — Mon, 07 Jan 2019 09:35:51 +0000

ELEDIGILAB agostino.giorgio Mon, 01/07/2019 - 10:35

Lab full name

Laboratorio di Elettronica dei Sistemi e delle Applicazioni Digitali

ERC 2nd Level Code

PE6 Computer Science and Informatics

PE6_7 Artificial intelligence, intelligent systems, multi agent systems

ERC 3rd level Code

Research Activities

Advanced Medical devices design and implementation
Telemedicine and remote health monitoring platforms development
Embedded Systems design on FPGA and microcontrollers
Development of Artificial Intelligence algorithms and deployment on microcontrollers, minicomputers (Raspberry Pi), personal computer, processors (Smartphones)
Electron devices modeling

Department

agostino.giorgio@poliba.it

Contact Person

Agostino Giorgio

Companies and Institutions

University - Policlinico di Bari - Cardiology division

Services

1. Intel FPGA boards for deployment

2. Microcontrollers boards for deployment

3. Software for models and algorithms development and debug

Address / How to reach us

DEI – Politecnico di Bari Via E. Orabona, 4 70125 Bari Plesso Salvatore - 3 piano

Hours

Monday to Friday 8.30-12.30

Area (mq)

Link to external content

http://www.eledigilab.com

IN2Lab

vitoantonio.bevilacqua — Wed, 19 Dec 2018 11:22:49 +0000

IN2Lab vitoantonio.be… Wed, 12/19/2018 - 12:22

Lab full name

Industrial Informatics Laboratory

ERC 2nd Level Code

PE6 Computer Science and Informatics

LS2 Genetics, Genomics, Bioinformatics and Systems Biology

LS5 Neurosciences and Neural Disorders

LS7 Diagnostic Tools, Therapies and Public Health

LS9 Applied Life Sciences and Non-Medical Biotechnology

ERC 3rd level Code

PE6_7 Artificial intelligence, intelligent systems, multi agent systems

PE6_8 Computer graphics, computer vision, multi media, computer games

PE6_9 Human computer interaction and interface, visualisation and natural language processing

PE6_11 Machine learning statistical data processing and applications using signal processing

PE6_12 Scientific computing, simulation and modelling tools

PE6_13 Bioinformatics, biocomputing, and DNA and molecular computation

PE7_7 Signal processing

PE7_9 Man-machine-interfaces

PE7_10 Robotics

LS2_11 Computational biology

LS5_4 Sensory systems

LS7_1 Medical engineering and technology

LS9_3 Bioengineering of cells, tissues, organs and organisms

Research Activities

The In2Lab hosts Apulian Bioengineering s.r.l., a spin-off company and innovative start-up founded in March 2019. (http://www.apulianbioengineering.com/)

The In2Lab research activities mainly focus on Electronic and Information Bioengineering and
ICT solutions for Industry 4.0:
Industrial Informatics and Real World Applications
Medical Imaging
Medical Informatics and Biometric Applications
Human Computer Interaction and Human Machine Interaction
Image Processing and Artificial Vision
Machine Learning and Soft Computing Applications
Intelligent Computer Aided Diagnosis, Prognosis, Rehabilitation and Therapy from biomedical data and signals
Robotics and Domotics
Virtual and Augmented Reality
Bioinformatics and Systems Biology
Safety and Security
Bioengineering
Artificial Intelligence

Department

vitoantonio.bevilacqua@poliba.it

Contact Person

Vitoantonio Bevilacqua

Companies and Institutions

Apulian Bioengineering S.R.L.

Comau S.P.A

Protom Group S.P.A.

R.I. S.P.A.

Cupersafety S.R.L.

Kinema S.R.L.

Mespo S.N.C.

Forte S.R.L.

LMA S.R.L.

NEWS S.R.L.

AMT Services S.R.L.

Item Oxygen S.R.L.

Consorzio CETMA

IRIS S.n.c.

BioResult S.R.L.

Masmec S.p.A.

Mer Mec S.p.A.

Trait d’Union S.R.L.

eResult S.R.L.

SER & Practices S.R.L.

Graphiservice S.R.L.

Media Broadcast Communication s.a.s.

Fotolito 38 S.R.L.

Quorum Italia S.R.L.

Bautech S.R.L.

Escoop European Social Cooperative

Laboratorio di Analisi Cliniche Dr. Pignatelli S.R.L.

Agiler srl

Ena Consulting S.R.L.

Orizzonti Consulting S.R.L.

Code Architects S.R.L.

Murgia Sviluppo S.C.A.R.L.

Giuseppe Laterza and Figli S.p.A.

Medica Sud S.R.L.

Cardio on line Europe S.R.L

Intact Health Care

Paperleap S.R.L.

Mosaico Digitale S.R.L.

Ligi Tecnologie Medicali S.p.A.

Molino Casillo Group

Scuola Superiore Sant’Anna di Pisa – Institute of Mechanical Intelligence

Scuola Superiore Sant’Anna di Pisa - Tecip Institute

Scuola Superiore Sant’Anna di Pisa - Biorobotics Institute

Dipartimento SMBNOS Università degli Studi di Bari

Dipartimento DETO Università degli Studi di Bari

Dipartimento di Ingegneria dell’Innovazione Università del Salento

Consiglio Nazionale delle Ricerche CNR - IMM

Università degli Studi di Foggia - Ospedali Riuniti

Ospedale IRCCS Saverio De Bellis – Castellana Grotte (BA)

IRCCS Istituto Tumori Giovanni Paolo II di Bari

Casa Sollievo della Sofferenza - IRCCS - San Giovanni Rotondo

RNBIO: Rete Nazionale di Bioinformatica

Biosistema S.C.A.R.L.

Co.Re.Ma.R. Puglia.

Projects

PREMED – Medical Decision Support System based on medical images processing

RESCAP - Cognitive Functions Assessment and Rehabilitation

IHCS - Health Information Systems

MASMART – Multimodal Medical Imaging Fusion

ARONA – Medical imaging processing for spine surgery (Research Projects funded by companies related to the medical images, signals and data processing)

RECALL - Cognitive Functions Assessment and Rehabilitation (Apulia Region – Innolabs)

SOS – Smart Operating Shelter (Apulia Region – Innonetwork)

PRECIOUS – Sepsis Assessment in Intensive Care Unit (Apulia Region – Technological Clusters)

RoboVir – Virtual Reality for Rehabilitation (Bric Inail)

MET-AAL – Innovative system for the Ambient Assisted Living (Apulia Region)

CONTACT – Medical Images Processing for Orthopedics (National Research Project 2014-2020)

MAIA – Virtual and Augmented Reality for Industry 4.0 (National Research Project 2014-2020)

SSRR – Processing of Multimedia data for emotional state analysis

GCESYS - Green Community Efficiency Systems (National Research Project)

BIN PICKING - COMAU SpA

CASSANDRA - COMAU SpA

SLIDERAIL - MER MEC SpA

BRIEF - Biorobotics Research and Innovation Engineering Facilities

D34H

SISAGEN-CARDIO

AFYA-MOJA

NEUROBRIDGE

PSICHE

AI-VASCUES

LeCorPROC

AI-DENInfect

POC

HPC

ImPACT-AI

SUITES

Facilities

The available equipment allows to develop deep / machine learning models, implement and navigate in immersive virtual scenarios and acquire and process signals related to the human motion.

Services

Research, design, development, validation and production of innovative and intelligent systems in the field of electronic, information and industrial bioengineering for precision medicine and Industry 4.0.

Design, implementation, validation and test of decision support systems and human-machine interaction frameworks at a logical, physical and functional level.

StakeHolder

Boards

External Collaborators

Fellow

Graduate